High temperature vacuum brazing furnace

High temperature vacuum brazing furnace

 

Main technical data of high temperature vacuum brazing furnace
Model	Uniform temperature dimension	Highest temperature (℃)	Limit pressure (pa)	Pressure increasingrate (pa/h)	Uniform temperature property (℃)
459	450×450×900	1300	8.5×10-4	0.5	±3
559	500×500×900	1300	8.5×10-4	0.5	±3
669	600×600×900	1300	8.5×10-4	0.5	±3
6612	600×600×1100	1300	8.5×10-4	0.5	±3
7712	700×700×1200	1300	8.5×10-4	0.5	±5
8716	800×700×1600	1300	8.5×10-4	0.5	±5

It is used widely in copper, nickel, gold, stainless steel, high temperature alloy, especially the heat resistant alloy brazing with high content of aluminum and titanium. During the welding, the parts are under the vacuum condition with properties of non oxidization, non pollution and small distortion rate and without welding fluid, without pore, cinder inclusion and corrosion, which can realize multi lane brazing seam and multi component welding.

It has many modes of vertical, horizontal, upper opening and bottom opening.